Architects Specifications

Commercial Grade Sentinel:

Supply & deliver Commercial Grade Sentinel Matting as manufactured by Kleen-Tex SA
Matting is to be colour "……." and size "………."

Note:
which include edging:
1.50 x 1.80m .90 3.0m .90 x 4.0m 1.50 x 3.0m 1.20 x 4.0m 1.50 x 3.60m

Entrance X-Grip:

Supply & Install in mat recess (supplied by others) Entrance X-Grip commercial duty matting as supplied by
Kleen-Tex SA. With (nominate the filler strips by type & colour). Mat dimensions - ( nominate the width from left to right
and the depth from front to back)

Note: Entrance X-Grip is supplied in tile form and is directional so it is important to state the width
& the depth in order for the matting filler strips to run across the entrance and not in the same
direction as the traffic flow.
Filler Strips: The base of the mat is PVC but the filler strips can vary. "Standard fillers" are made from
Commercial Sentinel but other fillers are available including Cut pile nylon, or cotton if absorbancy is
required. Ask a representative for assistance if the "Standard filler" is not suitable.

Sentinel Tiles:

Supply and install Sentinel walk off tiles as manufactured by Kleen-Tex SA. Size 50cm x 50cm
Colour (nominate a colour from the Sentinel mat range). The tiles are to be fitted to a smooth, level screed
(supplied by others) and laid into a permanently tacky adhesive.

Note: The tiles are supplied "each" so it is advisable to nominate the size and dimensions of the area to be
covered rather than the square meters

JetPrint:

Supply and deliver to site JetPrint Nitrile rubber backed cut pile nylon mats with printed designs supplied by others.
Matting is as manufactured by Kleen-Tex SA and the size including edging is (nominate size)

Note: JetPrint mats are not suitable for use in a mat recess, but should be placed directly on the floor.
Any door which opens over the mats should be high enough to allow the door not to snag the mat when
opening - aprox gap should be 15 - 18mm